ATEX Peristaltic Pump

The ATEX Peristaltic Pump is extremely versatile for applications requiring high flow rates and environments requiring ATEX certification. The Pump can handle high pressures and comes in 21 different sizes which means we have a lot to offer.

Details

Features & Applications

Tech Info

Performance

The High PressureATEX Peristaltic Pump range retains all the standard features and benefits of the PT High-Pressure Peristaltic Pump, however, the PTX differs as it operates using lubricant-free rotating rollers and slower rotational speeds. This Peristaltic Pump offers 2 key additional benefits

Much slower operating speeds for the given flow rate
Rotating Rollers for soft hose compression

The Rotating Rollers ensure a soft compression of the hose instead of the standard hard fixed shoes. As the pump operates, the Rollers gently rotate as they compress the hose which greatly increases the life of the hose and reduced the surface friction of the pump, saving energy. The gentler handling of the hose, compared with the PT, increases the life of the hose. Thus, PTX can save your company money on maintenance and energy costs.

Features

Sealless
Fully reversible flow
Limitless dry running
Internal gearbox to reduce overall dimensions
Self-priming up to 9.8m
Discharge pressures up to 15 bar
Lubricant free
Suitable for both aggressive and viscous fluids
Hoses are available in NR and full EPDM

Typical applications of the High-Pressure ATEX Peristaltic Pump

The PTX Peristaltic Pump was introduced for applications ranging from seawater tanker offloading to high solids underflow slurry transfer where high flow rates with a high degree of accuracy and repeatability are required. The Rotating Rollers that are employed ensure a soft compression of the hose instead of the standard hard fixed shoes. The Rollers gently rotate as they compress the hose, extending the life of the hose and also losing little if any, power from surface friction. They also significantly reduce power consumption requirements during operation. Displacing up to 90 litres/revolution and capable of capacities up to 150 m³/hr and discharge pressures up to 15 Bar makes these units ideally suited for the following applications:

Processing of Effluent
Cake, Mining Waste & Mud Slurry Transfers
Transfer of Municipal Waste
Sea Tanker Offloading
Transfer of Sand Slurry
Thickener Underflow Feeding
Sea Water Offloading

If you have further questions, our Pump Specialists will have the answer.

Please don't hesitate to get in touch:

01928 333 400
[email protected]

How can we help?

Contact us

We pride ourselves on our service and response times, going above and beyond for clients to ensure we provide a long-lasting pump solution. Our pump specialists can help answer any queries and assist with pump projects to help your operation run as smoothly as possible. Get in touch with our sales team today.

01928 333 400

[email protected]